E-TECH Ultra Fine Polishing Compound - 500ml
Price:
Availability:
The E-TECH C3 Ultra Fine Polishing Compound is our gentlest of surface renovation compounds specifically developed as the final surface treatment to bring back an ultra-high gloss flawless finish
For use on all types of paint - water or solvent based, clear coat lacquers & varnishes.
Optimum viscosity to retain its moisture and not dry out to fast. Ideal for use on delicate surfaces like varnish, lacquer and gel coats with slight surface imperfections like swirl marks, micro scratches and leaves a hologram free finish.
Features:
-
Used by paint and body shops, professional polishers, valeters, detailing companies, dedicated enthusiasts in automotive, marine and motorbike applications.
-
An ultra-fine polishing compound equivalent to 3000 grit abrasive paper.
-
Developed for use by hand or mechanical polishers on all types of paint - water or solvent based, clear coat lacquers and varnishes.
-
For use on wood veneered and lacquered dash trim and inlays.
-
Ideal for use on piano black centre consoles, coated composites and gel coated glass fibre
-
A water based compound containing micro premium grade kaolin, suspended in a thickened emulsion of mineral oil in water.
-
Product is free of ammonia and harmful solvents. Does not contain animal derived components
-
An ultra-fine compound which for reference is approximately equivalent to 3000 abrasive paper.
-
Leaves an ultra-high gloss surface finish.
-
This product is non-flammable, non-toxic and is classified as non-hazardous to human health and the environment.
-
Manufactured in the UK to ISO9001:2008 quality standards to ensure optimum performance and consistency.
Shake well before use
By Hand
Apply a small amount of compound onto a clean micro fibre cloth and rub the area to be polished in small circular motions. Then with a clean part of the cloth buff off to reveal a high gloss finish. If you cannot achieve the desired finish using this method we recommend that you then use the mechanical method below.
By Mechanical Method
Set the drill speed between approx 1500-2000 rpm. Apply a small amount of the compound to the centre of a soft foam polishing pad; smear the compound around the area to be polished (apply more as required). Then using light to medium pressure move the drill back and forth over the affected area, periodically checking your polishing progress, until the desired finish is achieved.
Be careful not to use excessive hand pressure or hold the drill in one place as this can cause damage to the surface.
We recommend you perform a compatibility test on a small inconspicuous area before using this product and wear protective eyewear.
Do not cross contaminate any polishing cloths or pads with different compounds. After final polishing apply a suitable wax sealer to the surface if required.
